Hydraulic test bench JMSD-02

Sample configuration

• Mobile assembly table with a single-sided work zone, built-in space for installing a hydraulic power unit with double doors and a sound-proof housing, vertical perforated board for mounting hydraulic components, workspace lighting with a switch and a 230V socket
• Pump unit with a variable displacement piston pump with a Load Sensing controller with a capacity of 13 l/min, a 230V, 50 Hz electric motor with a power of 5,5 kW, a pressure limiting valve and a solenoid valve for quick pressure relief from the system
• 25 L tank with return filter, breather filter, oil level indicator
• Load Sensing Main Pressure Control Valve
• Switchboard controlling the operation of the power supply with overload protection
• Panel current, voltage and power meter
• Panel-mount DC power supply
• Panel-mounted electrical relay assembly
• Panel-mounted electrical switch assembly
• 2 x CAN bus pressure and temperature transducer
• 1 x CAN bus turbine flow meter
• 1 x electronic measurement panel with the ability to export data to a computer
• 2 x pressure and return line branching manifold with built-in manually operated overflow valve
• 1 x double-acting actuator with variable load
• 2 x double-acting cylinder
• 4 x electric limit switch
• 1 x gerotor motor
• 3 x manometer with hoses and measuring connectors
• 2 x electrically operated 4/3 directional valve
• 2 x manually operated 4/3 directional valve
• 1 x electrically operated 4/2 directional valve
• 1 x manually operated 4/2 directional valve
• 2 x throttle check valve mounted to manifolds
• 2 x relief valve mounted to the manifolds
• 2 x reducing valve mounted to the manifolds
• 2 x in-line throttle check valve
• 1 x in-line check valve
• 2 x in-line pilot operated check valve
• 1 x in-line flow divider
• 12 x hydraulic hose with quick couplings
• 40 x electrical wire with connectors
• A set of sample laboratory exercises

Hydraulic test bench DMSD-01

Sample configuration

• Mobile assembly table with a double-sided work zone, equipped with a container with drawers, a panel for mounting electrical relays, a holder for hanging diagrams and a hanger for hydraulic hoses
• Hydraulic power unit with a noise-reduced pump with a capacity of 8 l/min, a 230V, 50 Hz electric motor with a power of 1.1 kW, a pressure relief valve and a solenoid valve for quick pressure relief from the system
• Switchboard controlling the operation of the power supply with overload protection
• Panel-mount DC power supply
• Panel-mounted electrical relay assembly
• Panel-mounted electrical switch assembly
• 2 x pressure and return line branching manifold with built-in manually operated overflow valve
• 1 x single-acting actuator with spring return
• 2 x double-acting cylinder
• 4 x electric limit switch
• 1 x gerotor motor
• 2 x manometer with hoses and measuring connectors
• 2 x electrically operated 4/3 directional valve
• 2 x manually operated 4/3 directional valve
• 1 x electrically operated 4/2 directional valve
• 1 x manually operated 4/2 directional valve
• 2 x throttle check valve mounted to manifolds
• 2 x relief valve mounted to the manifolds
• 2 x reducing valve mounted to the manifolds
• 2 x in-line throttle check valve
• 1 x in-line check valve
• 2 x in-line pilot operated check valve
• 1 x in-line flow divider
• 12 x hydraulic hose with quick couplings
• 40 x electrical wire with connectors
• A set of sample laboratory exercises

Hydraulic test bench DMSD-02

Sample configuration

• Mobile assembly table with a double-sided work zone, equipped with a container with drawers, a panel for mounting electrical relays, a holder for hanging diagrams and a hanger for hydraulic hoses
• Pump unit with a variable displacement piston pump with a Load Sensing controller with a capacity of 11 l/min, a 230V, 50 Hz electric motor with a power of 2.2 kW, a pressure limiting valve and a solenoid valve for quick pressure relief from the system
• 25 L tank with return filter, breather filter, oil level indicator
• Load Sensing Main Pressure Control Valve
• Switchboard controlling the operation of the power supply with overload protection
• Panel current, voltage and power meter
• Panel-mount DC power supply
• Panel-mounted electrical relay assembly
• Panel-mounted electrical switch assembly
• 2 x CAN bus pressure and temperature transducer
• 1 x CAN bus turbine flow meter
• 1 x electronic measurement panel with the ability to export data to a computer
• 2 x pressure and return line branching manifold with built-in manually operated overflow valve
• 1 x double-acting actuator with variable load
• 2 x double-acting cylinder
• 4 x electric limit switch
• 1 x gerotor motor
• 3 x manometer with hoses and measuring connectors
• 2 x electrically operated 4/3 directional valve
• 2 x manually operated 4/3 directional valve
• 1 x electrically operated 4/2 directional valve
• 1 x manually operated 4/2 directional valve
• 2 x throttle check valve mounted to manifolds
• 2 x relief valve mounted to the manifolds
• 2 x reducing valve mounted to the manifolds
• 2 x in-line throttle check valve
• 1 x in-line check valve
• 2 x in-line pilot operated check valve
• 1 x in-line flow divider
• 12 x hydraulic hose with quick couplings
• 40 x electrical wire with connectors
• A set of sample laboratory exercises

Hydraulic-pneumatic test bench DMSD-03

Sample configuration

• Mobile assembly table with a double-sided work zone, built-in space for installing a hydraulic power unit and compressor with double doors on both sides of the table and a sound-proof housing, vertical perforated board for mounting hydraulic and pneumatic components, double-sided workspace lighting with a switch and a 230V socket
• Hydraulic power unit with a noise-reduced pump with a capacity of 8 l/min, a 230V, 50 Hz electric motor with a power of 1.1 kW, a pressure relief valve and a solenoid valve for quick pressure relief from the system
• Electrical panel controlling the station power supply, power supply and compressor control, safety switch, DC power supply and a set of switches for switching the circulation between pumps
• Electronic measurement set for testing pump characteristics and flow, pressure and temperature values, consisting of an electronic measurement panel with CAN technology with the possibility of exporting data to a computer, a turbine flow meter, a pressure and temperature transducer and a set
  cables,
• 2 x pressure and return line branching manifold with built-in manually operated overflow valve
• 1 x double-acting actuator with variable load
• 2 x double-acting cylinder
• 4 x electric limit switch
• 2 x gerotor motor
• 2 x manometer with hoses and measuring connectors
• 2 x electrically operated 4/3 directional valve
• 2 x manually operated 4/3 directional valve
• 1 x electrically operated 4/2 directional valve
• 1 x manually operated 4/2 directional valve
• 2 x throttle check valve mounted to manifolds
• 2 x relief valve mounted to the manifolds
• 2 x reducing valve mounted to the manifolds
• 2 x in-line throttle check valve
• 1 x in-line check valve
• 2 x in-line pilot operated check valve
• 1 x in-line flow divider
• 12 x hydraulic hose with quick couplings
• Oil-free compressor with a sound-proof design
• Pneumatics component kit
• Oil preparation kit with lubricator and pressure regulator
• 2x pneumatic actuator
• 2x pneumatic gripper
• 2x branch strip, set of pressure gauges and measuring accessories
• Set of pneumatic hoses, adapters and connectors
• 2x pneumatic distributor 4/3
• 2x pneumatic distributor 3/2
• pneumatic linear valves
• 1x Automation Studio Educational 8.0 Fluid Power Package + Siemens software license (hydraulics, proportional hydraulics, pneumatics, proportional pneumatics, mechanical connections, JIC & IEC electrical controls, digital electronics
• 1x license for service support for a period of 1 year (software Maintenance & Extended Support Program Educational Edition) including technical support, manufacturer catalogs, remote access, software updates, access to online training (2 hours per year), access to training materials on hydraulics, pneumatics and electrical engineering, access to completed exercises using Unity 3D
• AIO computer with a keyboard and mouse stand
• A set of sample laboratory exercises